top of page

Load data for .300 AAC Blackout + .308 | 165gr | Norma ORYX

Recommended Powder(s): Accurate No. 11 FS

.300 AAC Blackout + .308 | 165gr | Norma ORYX

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 165gr | Norma ORYX
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.191" | 30.3mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.332" | 8.4mm
Shank Seated Depth:
0.332" | 8.4mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B3864_C348
Last updated:
2025-01-01

Load data for 34 loads in caliber .300 AAC Blackout with .308 | 165gr | Norma ORYX bullet and 17 powders such as Accurate No. 11 FS. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
91%
44164
87%
**01
100%
ADI AR 2207
<<locked>>
96%
30211
60%
**55
96%
[Accurate 1680]*
<<locked>>
96%
44063
87%
**77
93%
Accurate 5744
<<locked>>
88%
43874
86%
**67
96%
Accurate No. 11 FS 👍
<<locked>>
89%
45353
89%
**80
99%
[Alliant Reloder-7]*
<<locked>>
95%
32039
63%
**42
93%
Hodgdon LilGun
<<locked>>
85%
43801
86%
**06
100%
IMR 4227
<<locked>>
97%
42424
84%
**44
98%
Lovex D060
<<locked>>
90%
43874
86%
**67
96%
Lovex D063
<<locked>>
88%
44730
88%
**70
97%
Lovex S053
<<locked>>
95%
37463
74%
**95
99%
ReloadSwiss RS 36
<<locked>>
96%
38653
76%
**37
97%
SNPE Vectan BA6 1/2
<<locked>>
96%
36347
72%
**96
100%
Shooters World Blackout
<<locked>>
88%
44730
88%
**70
97%
Shooters World Buffalo Rifle
<<locked>>
90%
43874
86%
**67
96%
Vihtavuori N110
<<locked>>
95%
45179
89%
**50
100%
Vihtavuori N120
<<locked>>
96%
29095
57%
**03
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
33446
66%
**60
99%
[ADI AR 2207]*
<<locked>>
90%
25802
51%
**63
94%
[Accurate 1680]*
<<locked>>
91%
36927
73%
**81
90%
[Accurate 5744]*
<<locked>>
81%
35375
70%
**39
94%
Accurate No. 11 FS
<<locked>>
81%
34490
68%
**36
97%
[Alliant Reloder-7]*
<<locked>>
90%
27209
54%
**54
90%
Hodgdon LilGun
<<locked>>
81%
39015
77%
**50
100%
[IMR 4227]*
<<locked>>
85%
30037
59%
**57
94%
[Lovex D060]*
<<locked>>
81%
33301
66%
**06
93%
[Lovex D063]*
<<locked>>
81%
35766
70%
**49
94%
Lovex S053
<<locked>>
85%
28369
56%
**50
98%
[ReloadSwiss RS 36]*
<<locked>>
85%
27789
55%
**57
93%
SNPE Vectan BA6 1/2
<<locked>>
92%
32561
64%
**47
100%
[Shooters World Blackout]*
<<locked>>
81%
35766
70%
**49
94%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
33301
66%
**06
93%
Vihtavuori N110
<<locked>>
81%
29617
58%
**50
100%
Vihtavuori N120
<<locked>>
92%
26266
52%
**47
96%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page